When you begin getting bids for a new roof installation project, one option you will have to decide on is whether you will get the entire roof surface covered with shingles or simply cover up the top of the current roof. The difference in cost is substantial between houses that receive full proof and those that only receive a partial roof re-roof. If you are planning to sell your house, it makes good economic sense to get the entire roof replaced with new shingles to match the new roofline. If you plan on doing the work yourself, you might think you can save a little by doing just the roof part of the project. However, professional roof repair jobs take time and the parts you may choose to purchase can be very expensive.
Another option you have for new roof installation is to get some tar and gravel and use that to repair the shingles that already exist. You will have to move everything, which can be quite heavy, so you might want to consider having a friend or family member help you move it. Before you get started, be sure to check with your local building codes to see if you are allowed to do the repairs in your area. Some states have restrictions about adding a second material to an existing roof.
If you want the easiest way to go about having a new roof installed, talk to a local roofer. They have plenty of experience when it comes to laying new roofs and you may want to talk with them about which option would be best in your situation. While it may seem like the more money you spend, re-roofing your home is actually a less costly option. It is much less time-consuming and you may even find you save money by choosing to tear down your existing roof and have a new one built.
The most popular option for new roof installation in an attic is to use a “hotter” layer of tar and gravel and then place a new cover over it. Tar and gravel may not be an option for everyone because of the amount of moisture that would be generated during the installation process. In this case, you may want to consider using an attic insulation product instead. It can be a lot cheaper than buying some new insulation and although it may not solve all of your problems with leaks, you will at least know that the problem is being addressed.
One of the biggest considerations homeowners face is the cost of having contractors come in and do the work. For a lot of people, the cost of hiring roofing contractors to perform a job is far greater than having it done by another professional. Some options allow you to reduce the cost of having contractors come in and do the work, including the materials they will need. Look for roofing contractors who charge less or even for free with this type of option so you can pay less. Despite that, hiring Roofers Lansing MI will save you more money than redo fixing the damages because it was done incorrectly.
Another thing that homeowners tend to forget when they’re thinking about having their roofs replaced is the matter of the shingles themselves. Even though you might be tempted to choose the cheapest shingles possible, these will wear out much faster than higher-grade ones. Therefore, you should always buy shingles that are a higher grade so they will last longer. It can also help you make up for the cost of these by installing a newer and better-looking roof on top.
Some people forget to think about soffits, the gutters that can carry rainwater away from your home and into downpipes or guttering. If your soffits look dirty and neglected, they will attract more damage and rot which means you’ll have to replace them sooner. It is recommended that you have your soffits inspected every year and fix any problems with them so you don’t have to get rid of them. If you’re afraid that this might cost a lot of money, it’s not necessary because you can usually just do a few parts of the job yourself. For example, instead of replacing the entire soffit, you can just take off the damaged portions and replace them with new ones.
One other thing you may forget to consider is the flashing around your windows and doors. Flashing is meant to protect your home and to keep water away from windows and doors while they are closed. However, it can be quite slippery when it is wet so you want to make sure you replace the flashing if it looks worn out or is just plain old. You can gently pry it loose with a screwdriver and then replace it with new flashing if you like. This won’t damage your windows or doors but it will ensure that they work as well as new.